Description
Subaru TPMS warning light on? This Jsueng pre-programmed 1-Pack sensor set replaces the failed factory unit — a direct OE-grade fit with no dealer visit needed. OE replacement numbers listed below.
Subaru TPMS Sensor Fitment & Compatibility
Browse all our TPMS sensors for Subaru and other makes.
Jsueng TPMS Sensors,Pre-Programmed Tire Pressure Monitor System for Subaru
Key Features
- 【OE PART NUMBER】: 28103FL000, 28103FL00A
- 【FITMENT/COMPATIBILITY】: 2018-2024 Subaru Ascent, 2018-2024 Subaru Crosstrek, 2020-2023 Subaru Evoltis, 2018-2024 Subaru Forester, 2016.09-2024 Subaru Impreza, 2017.07-2024 Subaru Legacy, 2018-2024 Subaru Outback, 2022-2023 Subaru WRX, 2017.03-2024.06 Subaru XV, 2017.04-2020 Subaru XV Crosstrek, 2023 Subaru XV Crosstrek
- 【PRE-PROGRAMMED】: Pre-programming DOES NOT mean that the sensor will automatically match your vehicle after installation. After replacing the sensor, you will need to perform a RE-LEARNING/PAIRING operation. This process may need a diagnostic scanner or activation tool
- 【OBDII Relearn】: 1.OBDII connector is required. 2.Confirm TPMS sensors are properly installed. 3.Adjust tire pressures to placard value. 4.Activate TPMS tool on left front tire sidewall next to the valve stem. 5.Repeat for Rf/RR/LR tires. 6.Apply OBD connector to DLC. 7.Tern ignition to ON. 8.Press OK on TPMS Tool to transfer date to ECU. 9.Disconnect OBD connector from DLC. 10.Turn ignition to OFF then start the engine. 11.Drive for at least 5 minutes at 28 mph
- 【LONG SERVICE LIFE】: The tire pressure sensor has a high-performance Cr2032 battery and 900Kpa(130.53psi) chip. It can be made to last up to 5-8 years of normal usage and can work on -40°c— +125°c. We provide the 1 year guarantee for our products to better serve our customers
- 【PROFESSIONAL TEST】: All tire pressure sensors need to undergo strict quality control before leaving the factory, including durability tests, high and low temperature tests, environmental tests, motor performance tests, mechanical property tests, performance & noise tests, strength tests, etc. Guarantee each product is all-round quality inspected, and strictly monitoring the defective products
Product Details
Jsueng TPMS Sensors. 2018-2024 Subaru Ascent, 2018-2024 Subaru Crosstrek, 2020-2023 Subaru Evoltis, 2018-2024 Subaru Forester, 2016.09-2024 Subaru Impreza, 2017.07-2024 Subaru Legacy, 2018-2024 Subaru Outback, 2022-2023 S. Replaces 28103FL000.
OE Part Number
28103FL000, 28103FL00A
Fitment / Compatibility
- 2018-2024 Subaru Ascent, 2018-2024 Subaru Crosstrek, 2020-2023 Subaru Evoltis, 2018-2024 Subaru Forester, 2016.09-2024 Subaru Impreza, 2017.07-2024 Subaru Legacy, 2018-2024 Subaru Outback, 2022-2023 Subaru WRX, 2017.03-2024.06 Subaru XV, 2017.04-2020 Subaru XV Crosstrek, 2023 Subaru XV Crosstrek
(For detailed and accurate compatibility information, please refer to the image content)
PRE-PROGRAMMED
Pre-programming DOES NOT mean that the sensor will automatically match your vehicle after installation. After replacing the sensor, you will need to perform a RE-LEARNING/PAIRING operation. This process may need a diagnostic scanner or activation tool
OBDII Relearn
- OBDII connector is required
- Confirm TPMS sensors are properly installed
- Adjust tire pressures to placard value
- Activate TPMS tool on left front tire sidewall next to the valve stem
- Repeat for Rf/RR/LR tires
- Apply OBD connector to DLC
- Tern ignition to ON
- Press OK on TPMS Tool to transfer date to ECU
- Disconnect OBD connector from DLC
- Turn ignition to OFF then start the engine
- Drive for at least 5 minutes at 28 mph
LONG SERVICE LIFE
The tire pressure sensor has a high-performance Cr2032 battery and 900Kpa(130.53psi) chip. It can be made to last up to 5-8 years of normal usage and can work on -40°c— +125°c. We provide the 1 year guarantee for our products to better serve our customers
PROFESSIONAL TEST
All tire pressure sensors need to undergo strict quality control before leaving the factory, including durability tests, high and low temperature tests, environmental tests, motor performance tests, mechanical property tests, performance & noise tests, strength tests, etc. Guarantee each product is all-round quality inspected, and strictly monitoring the defective products
Specifications
| Brand | Jsueng |
| Model / Part Number | 28103FL000 |
| Frequency | 315MHz |
| Quantity | Per variant |
| Measurement Accuracy | ±0.05 Bar |
| Response Time | 1 second |
| Upper Temperature Rating | 125 °C |
| Material | Metal, Plastic |
| Mounting Type | Clamp-In / Snap-In (per variant) |
| Battery | Internal, long-life lithium (non-replaceable) |
Support & Returns
Questions about product installation or use? Contact us at info@jsueng.com — we reply within one business day. Returns accepted within 3 days.
Reviews
There are no reviews yet.