Jsueng TPMS Sensor,315Mhz Tire Pressure Monitoring System Sensor Set of 1

Description

Need a replacement TPMS sensor? This Jsueng 315MHz 1-Pack sensor set fits multiple vehicle makes vehicles and arrives pre-programmed — swap it in, run the relearn, clear the dashboard warning light. OE replacement numbers listed below.

multiple vehicle makes TPMS Sensor 315MHz Fitment & Compatibility

Browse all our TPMS sensors for multiple vehicle makes and other makes.

Jsueng TPMS Sensor,315Mhz Tire Pressure Monitoring System Sensor Set of 1

Key Features

• 【Pre-programmed TPMS Sensor】The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,just activate them with TPMS scan tool. The specific operation is as follows Step OBDII RELEARN：1.Confirm TPMS sensors are properly installed,2. Adjust tire pressures to placard value,3. Activate TPMS Tool on left front tire sidewall next to the valve stem,4. Repeat for RF/RR/LR tires,5. Apply OBD connector to DLC,6. Turn ignition to ON,7. Press OK on TPMS Tool to transfer data to ECU,8. Disconnect OBD connector from DLC,9. Turn ignition to OFF then ON,10. Wait for 5 minutes,11. Drive for up to 20 minutes at 12 mph
• 【APPLICATION】Compatible for 2006-2011 Hyundai Accent,2010-2019 Hyundai Elantra ,2010-2013 Hyundai Equus,2008-2016 Hyundai Genesis ,2009-2014 Hyundai Genesis Sedan,2007-2010 Hyundai Sonata,2010-2017 Hyundai Tucson,2013 Hyundai Veracruz,2008-2020 Borrego,2017-2019 Cerato,2015-2018 Forte,2009 Mohave,2006-2017 Rio,2006-2011 Spectra,2007-2013 Sportage,2008-2017 Toyota Sequoia,2006-2020 Toyota Sienna,2006-2017 Toyota Tundra
• 【REPLACE PART NUMBER】529332F000,529333X200,529333X205,4260708010,426070C030,426070C050,426070C040,426070C060,426070C070
• 【NO SENSOR PROGRAMMING REQUIRED 】The tire pressure monitor system (TPMS) come pre-programmed specifically for your make/model/year of vehicle,just need activate them with OBD RELEARN by scan tool
• 【HIGH QUANLITY】High performance Cr2032 battery and 900kpa chip.Battery is made to last up to 5-8 years of normal use,and can withstand 40 degrees low temperature,125 degrees high temperature.
• 【GOOD SERVICE】One year warranty.Our commitment to you is total and we want you to always be 100% satisfied by the quality and efficiency of our service.

Product Details

Jsueng TPMS Sensor.

Pre-programmed TPMS Sensor

The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,just activate them with TPMS scan tool. The specific operation is as follows Step OBDII RELEARN：1.Confirm TPMS sensors are properly installed,2. Adjust tire pressures to placard value,3. Activate TPMS Tool on left front tire sidewall next to the valve stem,4. Repeat for RF/RR/LR tires,5. Apply OBD connector to DLC,6. Turn ignition to ON,7. Press OK on TPMS Tool to transfer data to ECU,8. Disconnect OBD connector from DLC,9. Turn ignition to OFF then ON,10. Wait for 5 minutes,11. Drive for up to 20 minutes at 12 mph

APPLICATION

Compatible for 2006-2011 Hyundai Accent,2010-2019 Hyundai Elantra ,2010-2013 Hyundai Equus,2008-2016 Hyundai Genesis ,2009-2014 Hyundai Genesis Sedan,2007-2010 Hyundai Sonata,2010-2017 Hyundai Tucson,2013 Hyundai Veracruz,2008-2020 Borrego,2017-2019 Cerato,2015-2018 Forte,2009 Mohave,2006-2017 Rio,2006-2011 Spectra,2007-2013 Sportage,2008-2017 Toyota Sequoia,2006-2020 Toyota Sienna,2006-2017 Toyota Tundra

REPLACE PART NUMBER

529332F000,529333X200,529333X205,4260708010,426070C030,426070C050,426070C040,426070C060,426070C070

NO SENSOR PROGRAMMING REQUIRED

The tire pressure monitor system (TPMS) come pre-programmed specifically for your make/model/year of vehicle,just need activate them with OBD RELEARN by scan tool

HIGH QUANLITY

High performance Cr2032 battery and 900kpa chip.Battery is made to last up to 5-8 years of normal use,and can withstand 40 degrees low temperature,125 degrees high temperature.

GOOD SERVICE

One year warranty.Our commitment to you is total and we want you to always be 100% satisfied by the quality and efficiency of our service.

Professional Test

All tire pressure sensors need to undergo strict quality control before leaving the factory, including durability tests, high and low temperature tests, environmental tests, and strength tests.

Specifications

Support & Returns

Questions about product installation or use? Contact us at info@jsueng.com — we reply within one business day. Returns accepted within 3 days.