TPMS Sensors,433Mhz set of 4 Tire Pressure Monitor System for Mercedes

Description

Need a replacement TPMS sensor? This Jsueng 433MHz 4-Pack sensor set fits Mercedes vehicles and arrives pre-programmed — swap it in, run the relearn, clear the dashboard warning light. OE replacement numbers listed below.

Mercedes TPMS Sensor 433MHz Fitment & Compatibility

Browse all our TPMS sensors for Mercedes and other makes.

TPMS Sensors,433Mhz set of 4 Tire Pressure Monitor System for Mercedes

Key Features

• 【OE PART NUMBER】: 05154876AA, 05154876AC, A0009050030, 670002790, A0009050030, A00099051804, A0009054100, A0009057200, A0045400217, A0035400217, A0009053907, A0009054204
• 【FITMENT/COMPATIBILITY】: Fit for 2012-2024 Mercedes A Class, 2010-2020 Mercedes AMG, 2014-2023 Mercedes AMG GT, 2011-2024 Mercedes B Class, 2007-2023 Mercedes C Class, 2006-2019 Mercedes CL Class, 2012-2024 Mercedes CLA Class, 2008-2018 Mercedes CLC Class, 2002-2018 Mercedes CLK Class, 2009-2017 Mercedes CLS Class, 2009-2018 Mercedes E Class, 2020-2024 Mercedes EQA, 2022-2024 Mercedes EQB, 2019-2024 Mercedes EQC, 2024 Mercedes EQG, 2020-2023 Mercedes EQV, 2007-2024 Mercedes G Class, 2009-2019 Mercedes GL Class, 2013-2024 Mercedes GLA Class, 2019-2024 Mercedes GLB Class (Detailed Application Below)
• 【PRE-PROGRAMMED】: Pre-programming DOES NOT mean that the sensor will automatically match your vehicle after installation. After replacing the sensor, you will need to perform a RE-LEARNING/PAIRING operation. This process may need a diagnostic scanner or activation tool
• 【OBDII RELEARN】: 1.OBDII connector is required. 2.Confirm TPMS sensors are properly installed. 3.Adjust tire pressures to placard value. 4.Activate TPMS tool on left front tire sidewall next to the valve stem. 5.Repeat for Rf/RR/LR tires. 6.Apply OBD connector to DLC. 7.Tern ignition to ON. 8.Press OK on TPMS Tool to transfer date to ECU. 9.Disconnect OBD connector from DLC. 10.Turn ignition to OFF then start the engine. 11.Drive for at least 5 minutes at 28 mph
• 【LONG SERVICE LIFE】: The tire pressure sensor has a high-performance Cr2032 battery and 900Kpa(130.53psi) chip. It can be made to last up to 5-8 years of normal usage and can work on -40°c— +125°c. We provide the 1 year guarantee for our products to better serve our customers
• 【PROFESSIONAL TEST】: All tire pressure sensors need to undergo strict quality control before leaving the factory, including durability tests, high and low temperature tests, environmental tests, motor performance tests, mechanical property tests, performance & noise tests, strength tests, etc. Guarantee each product is all-round quality inspected, and strictly monitoring the defective products

Product Details

TPMS Sensors. Fit for 2012-2024 Mercedes A Class, 2010-2020 Mercedes AMG, 2014-2023 Mercedes AMG GT, 2011-2024 Mercedes B Class, 2007-2023 Mercedes C Class, 2006-2019 Mercedes CL Class, 2012-2024 Mercedes CLA Class. Replaces 05154876AA.

OE Part Number

05154876AA, 05154876AC, A0009050030, 670002790, A0009050030, A00099051804, A0009054100, A0009057200, A0045400217, A0035400217, A0009053907, A0009054204

Fitment / Compatibility

• Fit for 2012-2024 Mercedes A Class, 2010-2020 Mercedes AMG, 2014-2023 Mercedes AMG GT, 2011-2024 Mercedes B Class, 2007-2023 Mercedes C Class, 2006-2019 Mercedes CL Class, 2012-2024 Mercedes CLA Class, 2008-2018 Mercedes CLC Class, 2002-2018 Mercedes CLK Class, 2009-2017 Mercedes CLS Class, 2009-2018 Mercedes E Class, 2020-2024 Mercedes EQA, 2022-2024 Mercedes EQB, 2019-2024 Mercedes EQC, 2024 Mercedes EQG, 2020-2023 Mercedes EQV, 2007-2024 Mercedes G Class, 2009-2019 Mercedes GL Class, 2013-2024 Mercedes GLA Class, 2019-2024 Mercedes GLB Class (Detailed Application Below)

(For detailed and accurate compatibility information, please refer to the image content)

PRE-PROGRAMMED

Pre-programming DOES NOT mean that the sensor will automatically match your vehicle after installation. After replacing the sensor, you will need to perform a RE-LEARNING/PAIRING operation. This process may need a diagnostic scanner or activation tool

OBDII RELEARN

1. OBDII connector is required
2. Confirm TPMS sensors are properly installed
3. Adjust tire pressures to placard value
4. Activate TPMS tool on left front tire sidewall next to the valve stem
5. Repeat for Rf/RR/LR tires
6. Apply OBD connector to DLC
7. Tern ignition to ON
8. Press OK on TPMS Tool to transfer date to ECU
9. Disconnect OBD connector from DLC
10. Turn ignition to OFF then start the engine
11. Drive for at least 5 minutes at 28 mph

LONG SERVICE LIFE

The tire pressure sensor has a high-performance Cr2032 battery and 900Kpa(130.53psi) chip. It can be made to last up to 5-8 years of normal usage and can work on -40°c— +125°c. We provide the 1 year guarantee for our products to better serve our customers

PROFESSIONAL TEST

All tire pressure sensors need to undergo strict quality control before leaving the factory, including durability tests, high and low temperature tests, environmental tests, motor performance tests, mechanical property tests, performance & noise tests, strength tests, etc. Guarantee each product is all-round quality inspected, and strictly monitoring the defective products

Specifications

Support & Returns

Questions about product installation or use? Contact us at info@jsueng.com — we reply within one business day. Returns accepted within 3 days.