TPMS Sensor,Pre-programmed Tire Pressure Monitor System for Infiniti Nissan

Description

Need a replacement TPMS sensor? This Jsueng 1-Pack sensor set fits Infiniti, Nissan vehicles and arrives pre-programmed — swap it in, run the relearn, clear the dashboard warning light. OE replacement numbers listed below.

Infiniti TPMS Sensor Fitment & Compatibility

Browse all our TPMS sensors for Infiniti, Nissan and other makes.

TPMS Sensor,Pre-programmed Tire Pressure Monitor System for Infiniti Nissan

Key Features

• 【OE PART NUMBER】: 407003JA0A, 407003JA0B, 407009DJ0A, 407002GD0B
• 【FITMENT/COMPATIBILITY】: Fit for 2012-2014 Infiniti JX35, 2013-2024 Infiniti Q50, 2014-2024 Infiniti Q50L, 2016-2024 Infiniti Q60, 2018-2021 Infiniti Q70, 2012-2022 Infiniti QX60, 2012-2018 Nissan Altima, 2020-2021 Nissan Frontier, 2013-2014 Nissan King, 2015-2024 Nissan Maxima, 2014-2024 Nissan Murano, 2020-2023 Nissan Note e-power, 2012-2021 Nissan Pathfinder (Detailed Application Below)
• 【PRE-PROGRAMMED】: Pre-programming DOES NOT mean that the sensor will automatically match your vehicle after installation. After replacing the sensor, you will need to perform a RE-LEARNING/PAIRING operation. This process may need a diagnostic scanner or activation tool
• 【OBDII RELEARN】: 1.OBDII connector is required. 2.Confirm TPMS sensors are properly installed. 3.Adjust tire pressures to placard value. 4.Activate TPMS tool on left front tire sidewall next to the valve stem. 5.Repeat for Rf/RR/LR tires. 6.Apply OBD connector to DLC. 7.Tern ignition to ON. 8.Press OK on TPMS Tool to transfer date to ECU. 9.Disconnect OBD connector from DLC. 10.Turn ignition to OFF then start the engine. 11.Drive for at least 5 minutes at 28 mph
• 【LONG SERVICE LIFE】: The tire pressure sensor has a high-performance Cr2032 battery and 900Kpa(130.53psi) chip. It can be made to last up to 5-8 years of normal usage and can work on -40°c— +125°c. We provide the 1 year guarantee for our products to better serve our customers
• 【PROFESSIONAL TEST】: All tire pressure sensors need to undergo strict quality control before leaving the factory, including durability tests, high and low temperature tests, environmental tests, motor performance tests, mechanical property tests, performance & noise tests, strength tests, etc. Guarantee each product is all-round quality inspected, and strictly monitoring the defective products

Product Details

TPMS Sensor. Fit for 2012-2014 Infiniti JX35, 2013-2024 Infiniti Q50, 2014-2024 Infiniti Q50L, 2016-2024 Infiniti Q60, 2018-2021 Infiniti Q70, 2012-2022 Infiniti QX60, 2012-2018 Nissan Altima, 2020-2021 Nissan Fro. Replaces 407003JA0A.

OE Part Number

407003JA0A, 407003JA0B, 407009DJ0A, 407002GD0B

Fitment / Compatibility

• Fit for 2012-2014 Infiniti JX35, 2013-2024 Infiniti Q50, 2014-2024 Infiniti Q50L, 2016-2024 Infiniti Q60, 2018-2021 Infiniti Q70, 2012-2022 Infiniti QX60
• 2012-2018 Nissan Altima, 2020-2021 Nissan Frontier, 2013-2014 Nissan King, 2015-2024 Nissan Maxima, 2014-2024 Nissan Murano, 2020-2023 Nissan Note e-power, 2012-2021 Nissan Pathfinder (Detailed Application Below)

(For detailed and accurate compatibility information, please refer to the image content)

PRE-PROGRAMMED

Pre-programming DOES NOT mean that the sensor will automatically match your vehicle after installation. After replacing the sensor, you will need to perform a RE-LEARNING/PAIRING operation. This process may need a diagnostic scanner or activation tool

OBDII RELEARN

1. OBDII connector is required
2. Confirm TPMS sensors are properly installed
3. Adjust tire pressures to placard value
4. Activate TPMS tool on left front tire sidewall next to the valve stem
5. Repeat for Rf/RR/LR tires
6. Apply OBD connector to DLC
7. Tern ignition to ON
8. Press OK on TPMS Tool to transfer date to ECU
9. Disconnect OBD connector from DLC
10. Turn ignition to OFF then start the engine
11. Drive for at least 5 minutes at 28 mph

LONG SERVICE LIFE

The tire pressure sensor has a high-performance Cr2032 battery and 900Kpa(130.53psi) chip. It can be made to last up to 5-8 years of normal usage and can work on -40°c— +125°c. We provide the 1 year guarantee for our products to better serve our customers

PROFESSIONAL TEST

All tire pressure sensors need to undergo strict quality control before leaving the factory, including durability tests, high and low temperature tests, environmental tests, motor performance tests, mechanical property tests, performance & noise tests, strength tests, etc. Guarantee each product is all-round quality inspected, and strictly monitoring the defective products

Specifications

Support & Returns

Questions about product installation or use? Contact us at info@jsueng.com — we reply within one business day. Returns accepted within 3 days.