TPMS Sensors,433Mhz set of 4 Tire Pressure Monitor System for Hyundai Kia

Description

Hyundai, Kia TPMS warning light on? This Jsueng 433MHz pre-programmed 4-Pack sensor set replaces the failed factory unit — a direct OE-grade fit with no dealer visit needed. OE replacement numbers listed below.

Hyundai TPMS Sensor 433MHz Fitment & Compatibility

Browse all our TPMS sensors for Hyundai, Kia and other makes.

TPMS Sensors,433Mhz set of 4 Tire Pressure Monitor System for Hyundai Kia

Key Features

• 【OE PART NUMBER】: 52933D2100, 52933F2000, 52940L1100, 52933D4100, 52933D9100
• 【FITMENT/COMPATIBILITY】: Fit for 2017-2022 Sedan GENESIS G90, 2017-2022 Hyundai Elantra, 2018-2021 Hyundai Elantra GT, 2016-2021 Hyundai Loniq, 2018-2021 Hyundai Kona, 2017-2019 Hyundai Santa Fe Sport, 2020-2022 Hyundai Sonata, 2019-2021 Hyundai Veloster, 2020-2022 Hyundai Venue, 2017-2021 Kia Cadenza, 2022 Kia Carnival, 2021-2022 Kia K5, 2017-2021 Kia Niro, 2017-2021 Kia Optima, 2021-2022 Kia Seltos, 2018-2022 Kia Sorento, 2020-2021 Kia Soul (Detailed Application Below)
• 【PRE-PROGRAMMED】: Pre-programming DOES NOT mean that the sensor will automatically match your vehicle after installation. After replacing the sensor, you will need to perform a RE-LEARNING/PAIRING operation. This process may need a diagnostic scanner or activation tool
• 【OBDII RELEARN】: 1.OBDII connector is required. 2.Confirm TPMS sensors are properly installed. 3.Adjust tire pressures to placard value. 4.Activate TPMS tool on left front tire sidewall next to the valve stem. 5.Repeat for Rf/RR/LR tires. 6.Apply OBD connector to DLC. 7.Tern ignition to ON. 8.Press OK on TPMS Tool to transfer date to ECU. 9.Disconnect OBD connector from DLC. 10.Turn ignition to OFF then start the engine. 11.Drive for at least 5 minutes at 28 mph
• 【LONG SERVICE LIFE】: The tire pressure sensor has a high-performance Cr2032 battery and 900Kpa(130.53psi) chip. It can be made to last up to 5-8 years of normal usage and can work on -40°c— +125°c. We provide the 1 year guarantee for our products to better serve our customers
• 【PROFESSIONAL TEST】: All tire pressure sensors need to undergo strict quality control before leaving the factory, including durability tests, high and low temperature tests, environmental tests, motor performance tests, mechanical property tests, performance & noise tests, strength tests, etc. Guarantee each product is all-round quality inspected, and strictly monitoring the defective products

Product Details

TPMS Sensors. Fit for 2017-2022 Sedan GENESIS G90, 2017-2022 Hyundai Elantra, 2018-2021 Hyundai Elantra GT, 2016-2021 Hyundai Loniq, 2018-2021 Hyundai Kona, 2017-2019 Hyundai Santa Fe Sport, 2020-2022 Hyundai Sonat. Replaces 52933D2100.

OE Part Number

52933D2100, 52933F2000, 52940L1100, 52933D4100, 52933D9100

Fitment / Compatibility

• Fit for 2017-2022 Sedan GENESIS G90
• 2017-2022 Hyundai Elantra, 2018-2021 Hyundai Elantra GT, 2016-2021 Hyundai Loniq, 2018-2021 Hyundai Kona, 2017-2019 Hyundai Santa Fe Sport, 2020-2022 Hyundai Sonata, 2019-2021 Hyundai Veloster, 2020-2022 Hyundai Venue
• 2017-2021 Kia Cadenza, 2022 Kia Carnival, 2021-2022 Kia K5, 2017-2021 Kia Niro, 2017-2021 Kia Optima, 2021-2022 Kia Seltos, 2018-2022 Kia Sorento, 2020-2021 Kia Soul (Detailed Application Below)

(For detailed and accurate compatibility information, please refer to the image content)

PRE-PROGRAMMED

Pre-programming DOES NOT mean that the sensor will automatically match your vehicle after installation. After replacing the sensor, you will need to perform a RE-LEARNING/PAIRING operation. This process may need a diagnostic scanner or activation tool

OBDII RELEARN

1. OBDII connector is required
2. Confirm TPMS sensors are properly installed
3. Adjust tire pressures to placard value
4. Activate TPMS tool on left front tire sidewall next to the valve stem
5. Repeat for Rf/RR/LR tires
6. Apply OBD connector to DLC
7. Tern ignition to ON
8. Press OK on TPMS Tool to transfer date to ECU
9. Disconnect OBD connector from DLC
10. Turn ignition to OFF then start the engine
11. Drive for at least 5 minutes at 28 mph

LONG SERVICE LIFE

The tire pressure sensor has a high-performance Cr2032 battery and 900Kpa(130.53psi) chip. It can be made to last up to 5-8 years of normal usage and can work on -40°c— +125°c. We provide the 1 year guarantee for our products to better serve our customers

PROFESSIONAL TEST

All tire pressure sensors need to undergo strict quality control before leaving the factory, including durability tests, high and low temperature tests, environmental tests, motor performance tests, mechanical property tests, performance & noise tests, strength tests, etc. Guarantee each product is all-round quality inspected, and strictly monitoring the defective products

Specifications

Support & Returns

Questions about product installation or use? Contact us at info@jsueng.com — we reply within one business day. Returns accepted within 3 days.