TPMS Sensors,315Mhz set of 4 Tire Pressure Monitor System for Chrysler Jeep

Description

Need a replacement TPMS sensor? This Jsueng 315MHz 4-Pack sensor set fits Chrysler, Jeep vehicles and arrives pre-programmed — swap it in, run the relearn, clear the dashboard warning light. OE replacement numbers listed below.

Chrysler TPMS Sensor 315MHz Fitment & Compatibility

Browse all our TPMS sensors for Chrysler, Jeep and other makes.

TPMS Sensors,315Mhz set of 4 Tire Pressure Monitor System for Chrysler Jeep

Key Features

• 【OE PART NUMBER】: 68078861AA, 56053036AA, 56029479AA, 56053030AB, 56053036AA, 56029465AB, 4313057L00, 52933A5000, 68001696AA, 68001696AB, 68078861AA, 56029479AB, 56053030AB, 4250C276
• 【FITMENT/COMPATIBILITY】: Fit for 2011-2014 Chrysler 200,2005-2007 315Mhz Chrysler 300,2007-2009 Chrysler Aspen,2006-2008 Chrysler Pacifica,2007-2010 Chrysler PT Cruiser,2007-2010 315Mhz Chrysler Sebring,2006-2007 Chrysler Town&Country,2007-2014 Dodge Avenger,2007-2012 Dodge Caliber,2006-2007 Dodge Caravan,2006-2007 Dodge Charger (Detailed Application Below)
• 【PRE-PROGRAMMED】: Pre-programming DOES NOT mean that the sensor will automatically match your vehicle after installation. After replacing the sensor, you will need to perform a RE-LEARNING/PAIRING operation. This process may need a diagnostic scanner or activation tool
• 【OBDII RELEARN】: 1.OBDII connector is required. 2.Confirm TPMS sensors are properly installed. 3.Adjust tire pressures to placard value. 4.Activate TPMS tool on left front tire sidewall next to the valve stem. 5.Repeat for Rf/RR/LR tires. 6.Apply OBD connector to DLC. 7.Tern ignition to ON. 8.Press OK on TPMS Tool to transfer date to ECU. 9.Disconnect OBD connector from DLC. 10.Turn ignition to OFF then start the engine. 11.Drive for at least 5 minutes at 28 mph
• 【LONG SERVICE LIFE】: The tire pressure sensor has a high-performance Cr2032 battery and 900Kpa(130.53psi) chip. It can be made to last up to 5-8 years of normal usage and can work on -40°c— +125°c. We provide the 1 year guarantee for our products to better serve our customers
• 【PROFESSIONAL TEST】: All tire pressure sensors need to undergo strict quality control before leaving the factory, including durability tests, high and low temperature tests, environmental tests, motor performance tests, mechanical property tests, performance & noise tests, strength tests, etc. Guarantee each product is all-round quality inspected, and strictly monitoring the defective products

Product Details

TPMS Sensors. Fit for 2011-2014 Chrysler 200,2005-2007 315Mhz Chrysler 300,2007-2009 Chrysler Aspen,2006-2008 Chrysler Pacifica,2007-2010 Chrysler PT Cruiser,2007-2010 315Mhz Chrysler Sebring,2006-2007 Chrysler Tow. Replaces 68078861AA.

OE Part Number

68078861AA, 56053036AA, 56029479AA, 56053030AB, 56053036AA, 56029465AB, 4313057L00, 52933A5000, 68001696AA, 68001696AB, 68078861AA, 56029479AB, 56053030AB, 4250C276

Fitment / Compatibility

• Fit for 2011-2014 Chrysler 200, 2005-2007 315Mhz Chrysler 300, 2007-2009 Chrysler Aspen, 2006-2008 Chrysler Pacifica, 2007-2010 Chrysler PT Cruiser, 2007-2010 315Mhz Chrysler Sebring, 2006-2007 Chrysler Town&Country
• 2007-2014 Dodge Avenger, 2007-2012 Dodge Caliber, 2006-2007 Dodge Caravan, 2006-2007 Dodge Charger (Detailed Application Below)

(For detailed and accurate compatibility information, please refer to the image content)

PRE-PROGRAMMED

Pre-programming DOES NOT mean that the sensor will automatically match your vehicle after installation. After replacing the sensor, you will need to perform a RE-LEARNING/PAIRING operation. This process may need a diagnostic scanner or activation tool

OBDII RELEARN

1. OBDII connector is required
2. Confirm TPMS sensors are properly installed
3. Adjust tire pressures to placard value
4. Activate TPMS tool on left front tire sidewall next to the valve stem
5. Repeat for Rf/RR/LR tires
6. Apply OBD connector to DLC
7. Tern ignition to ON
8. Press OK on TPMS Tool to transfer date to ECU
9. Disconnect OBD connector from DLC
10. Turn ignition to OFF then start the engine
11. Drive for at least 5 minutes at 28 mph

LONG SERVICE LIFE

The tire pressure sensor has a high-performance Cr2032 battery and 900Kpa(130.53psi) chip. It can be made to last up to 5-8 years of normal usage and can work on -40°c— +125°c. We provide the 1 year guarantee for our products to better serve our customers

PROFESSIONAL TEST

All tire pressure sensors need to undergo strict quality control before leaving the factory, including durability tests, high and low temperature tests, environmental tests, motor performance tests, mechanical property tests, performance & noise tests, strength tests, etc. Guarantee each product is all-round quality inspected, and strictly monitoring the defective products

Specifications

Support & Returns

Questions about product installation or use? Contact us at info@jsueng.com — we reply within one business day. Returns accepted within 3 days.