Description
multiple vehicle makes TPMS warning light on? This Jsueng pre-programmed 4-Pack sensor set replaces the failed factory unit — a direct OE-grade fit with no dealer visit needed. OE replacement numbers listed below.
multiple vehicle makes TPMS Sensor Fitment & Compatibility
Browse all our TPMS sensors for multiple vehicle makes and other makes.
Jsueng 4PCS Pre-Programmed TPMS Sensor Tire Pressure Monitoring Sensor
Key Features
- 【OE PART NUMBER】: 426070C070, 426070C050, 426070C030, 426070C060, 426070C040, 4260708010, 426070C0500
- 【FITMENT/COMPATIBILITY】: Fit for 2008-2017 Toyota Sequoia, 2006-2020 Toyota Sienna, 2006-2017 Toyota Tundra
- 【PRE-PROGRAMMED】: Pre-programming DOES NOT mean that the sensor will automatically match your vehicle after installation. After replacing the sensor, you will need to perform a RE-LEARNING/PAIRING operation. This process may need a diagnostic scanner or activation tool
- 【OBDII RELEARN】: 1.OBDII connector is required. 2.Confirm TPMS sensors are properly installed. 3.Adjust tire pressures to placard value. 4.Activate TPMS tool on left front tire sidewall next to the valve stem. 5.Repeat for Rf/RR/LR tires. 6.Apply OBD connector to DLC. 7.Tern ignition to ON. 8.Press OK on TPMS Tool to transfer date to ECU. 9.Disconnect OBD connector from DLC. 10.Turn ignition to OFF then start the engine. 11.Drive for at least 5 minutes at 28 mph
- 【LONG SERVICE LIFE】: The tire pressure sensor has a high-performance Cr2032 battery and 900Kpa(130.53psi) chip. It can be made to last up to 5-8 years of normal usage and can work on -40°c— +125°c. We provide the 1 year guarantee for our products to better serve our customers
- 【PROFESSIONAL TEST】: All tire pressure sensors need to undergo strict quality control before leaving the factory, including durability tests, high and low temperature tests, environmental tests, motor performance tests, mechanical property tests, performance & noise tests, strength tests, etc. Guarantee each product is all-round quality inspected, and strictly monitoring the defective products
Product Details
Jsueng 4PCS Pre-Programmed TPMS Sensor Tire Pressure Monitoring Sensor. Fit for 2008-2017 Toyota Sequoia, 2006-2020 Toyota Sienna, 2006-2017 Toyota Tundra. Replaces 426070C070.
OE Part Number
426070C070, 426070C050, 426070C030, 426070C060, 426070C040, 4260708010, 426070C0500
Fitment / Compatibility
- Fit for 2008-2017 Toyota Sequoia, 2006-2020 Toyota Sienna, 2006-2017 Toyota Tundra
(For detailed and accurate compatibility information, please refer to the image content)
PRE-PROGRAMMED
Pre-programming DOES NOT mean that the sensor will automatically match your vehicle after installation. After replacing the sensor, you will need to perform a RE-LEARNING/PAIRING operation. This process may need a diagnostic scanner or activation tool
OBDII RELEARN
- OBDII connector is required
- Confirm TPMS sensors are properly installed
- Adjust tire pressures to placard value
- Activate TPMS tool on left front tire sidewall next to the valve stem
- Repeat for Rf/RR/LR tires
- Apply OBD connector to DLC
- Tern ignition to ON
- Press OK on TPMS Tool to transfer date to ECU
- Disconnect OBD connector from DLC
- Turn ignition to OFF then start the engine
- Drive for at least 5 minutes at 28 mph
LONG SERVICE LIFE
The tire pressure sensor has a high-performance Cr2032 battery and 900Kpa(130.53psi) chip. It can be made to last up to 5-8 years of normal usage and can work on -40°c— +125°c. We provide the 1 year guarantee for our products to better serve our customers
PROFESSIONAL TEST
All tire pressure sensors need to undergo strict quality control before leaving the factory, including durability tests, high and low temperature tests, environmental tests, motor performance tests, mechanical property tests, performance & noise tests, strength tests, etc. Guarantee each product is all-round quality inspected, and strictly monitoring the defective products
Specifications
| Brand | Jsueng |
| Model / Part Number | 426070C070 |
| Frequency | 315MHz |
| Quantity | Per variant |
| Measurement Accuracy | ±0.05 Bar |
| Response Time | 1 second |
| Upper Temperature Rating | 125 °C |
| Material | Metal, Plastic |
| Mounting Type | Clamp-In / Snap-In (per variant) |
| Battery | Internal, long-life lithium (non-replaceable) |
Support & Returns
Questions about product installation or use? Contact us at info@jsueng.com — we reply within one business day. Returns accepted within 3 days.
Reviews
There are no reviews yet.